The Future Development of CO2 LaserPower continuous CO2 laser marking machine laser: for the helicopter engine turbine blade with continuous laser cladding cracks and blade deformation problems in the 5kW continuous cross-flow CO2 laser, the use of new power control program, through software and related control, To achieve the pulse blue laser pointer power output to overcome the use of high-power switching power supply costs and stability problems and pulse modulation frequency up to 5Hz, modulation duty cycle can reach 5% to 100% when using 4kW peak power, 4Hz The results show that the heat affected zone is 50% lower than that of the continuous laser, and the hardness is increased by 5% after the cladding. The results show that the heat recovery zone is 50% , The interface with the performance of the base material is equivalent, no melting cracks and leaf deformation.Compact long-life RF excitation waveguide CO2 laser: In order to make CO2 lasers in industrial processing and military have a wider range of applications, the use of aluminum alloy drawing profiles as a laser shell, plate mounted inductors instead of the traditional wirewound inductance structure and all-metal Sealing technology, etc., developed a compact long-life RF excitation waveguide CO2 laser. Can be continuously output or no higher than 20kHz modulation frequency pulse output, the maximum output power of 30W, the measured working life of more than 1500h, storage life of more than 1.5a The results show that the laser pointer has the characteristics of compact structure, stable output power, long working life, continuous and pulse modulation, and can be applied in military applications in addition to the processing of various materials.Acousto-Optic Q2 Laser: In order to meet the requirements of laser ranging, environmental detection, space communication and laser-material interaction mechanism research, developed sound and light modulation QC02 laser. The main technical parameters of the output of the laser are analyzed and calculated by using the Q – ray pulse rate equation of the Q – switched pulsed laser. The method of acoustic and QCO2: laser optimization design is proposed. Conducted a validation experiment.In addition to the original DC discharge (DC discharge) excitation technology, there are AC discharge (AC discharge), radio frequency discharge (RF discharge), microwave discharge, which are developed this year, a variety of new incentive technology, DC discharge and RF discharge. Different materials, different paths of laser cutting machine, welding, surface treatment, often require the green laser pointer beam to change the way of work at any time, sometimes requiring continuous output, and sometimes require pulse output waveform. In recent years there has been enhanced pulse output, so that processing performance improved significantly.High current gas discharge in the current, voltage, gas temperature are high, glow discharge positive column area of the thermal instability and arc contraction and so on more serious. How to ensure the uniformity and stability of large volume glow discharge is one of the key technologies of high power carbon dioxide lasers. Our commonly used techniques include: the large volume of discharge divided into many small discharge areas were controlled; gas rapid flow instability of the disturbing factors in time to bring out the discharge area; increase the turbulence to increase the uniformity of discharge; increase pre-ionization or external Ionization source to increase the uniformity of discharge.The pulse repetition frequency of the laser is lHz ~ 50kHz, the output laser pulse width is 180ns and the peak power is 4062W, which is basically the same as the theoretical calculation. The results show that: through the acousto-optic crystal (AO) optimization and reasonable design of the resonator. Can achieve a small CO2 laser marking machine laser high frequency, narrow pulse width, high peak power output, and through the raster selection line design and TTL signal control to achieve such a red laser pointer wavelength tuning and coding output.Laser cutting, welding and other applications require excellent beam quality, especially after the focus of the beam as thin as possible. In high power lasers, carbon dioxide lasers are the best of the beam. In the high power state, the thermal distortion and thermal damage of the laser crystal output window and the total reflection mirror are often the key technical problems that limit the improvement of the laser power and the improvement of the beam quality. Substrate selection and cooling, polishing, ultra-fine car and other process problems is also very important.Carbon dioxide laser electro-optical conversion rate is generally in the range of 10% -20%, which can be considered a high conversion rate. Most of the rest of the discharge power through the electronic and gas particles of the elastic collision of gas heating, temperature rise; for high power lasers, the gas temperature rise faster. When the working pressure temperature reaches 300 ℃, the laser pen light and the lower energy level of the carbon dioxide laser have no laser output because there is no particle inversion. The actual situation is the gas temperature is greater than 150 ℃, the electro-optical conversion efficiency has decreased significantly. For this reason, the device is required to be able to quickly and efficiently take away the heat of the discharge zone gas. There are two commonly used methods: gas convection cooling and diffusion conduction cooling.http://michale.kitemi.net/http://lasernzh.microblr.com/post/83272/The_Spatial_Distribution_of_Laser_Beamshttp://www.wedspace.com/blogs/entry/Unit-Technology-Laser-Monitoring-and-Control